A while back I walked into a local pawn shop to kill some time. Under the counter almost hidden from view I could see the shape of a snub nose.  I asked to take a gander, and he handed me me over a somewhat pitted ( left in one of those infernal cloth gun cases) not much blueing left and they couldn’t open the cylinder.  I haven’t had a .38spl. Of any kind for years and being I have buckets of brass, dies and several bullet molds I figured what the heck.  For very little cash and a quick background check I was on my way.  I had a good idea why the cylinder wouldn’t open so using the tip of my pocket knife I opened the cylinder, removed the ejector rod, slathered on some clear fingernail polish and tightened it back down. One problem solved.  A bunch of scrubbing, filing and then a date with a cutoff wheel and grinder head on the Dremel tool to remove the hammer spur and things began to take shape.  The next part of the project was a quick dry shower with the sand blaster to help hide any small pits and to dull the surface.  Added a few coats of cold blue just for the heck of it.  Next came a small concealable but comfy grips from Vintage Industries.  Off to the backyard range with a variety of ammo with assorted bullets.  I soon discovered that with the selection I had on hand was either too heavy or too light so a order was placed to Matt’s Bullets for a couple hundred 125gr. Wadcutters ( upon arrival I found that the soft lead wadcutters actually weighed 131grs. The wadcutters turned out to be perfect for my needs. At 26 yards they shot to the point of aim and were very controlable in a small gun.  Penetration in water jugs was adequate and bullets even expanded a bit to .375-.380 inches. Not great but much better than most factory hollowpoints on the market out of a snub revolver.  Soon I ordered a IWB Kydex holster from Gun and Flower and we were in business.  I began carrying this light little gun more and more, especially when hauling a chainsaw around working in the woods. I even used it to bring home a ruffed grouse for supper that made the mistake of walking instead of bursting into flight.   Things were going just swell for my little ugly gun and I until one evening I did a search on Facebook for snubnose sites and came across a site called ” Snub Noir: The new home for gats and hats”.  Soon I needed a noir era period gun and a old Colt Detective Special turned up at my door. Then I stumbled into a Rock Island 206 that became my load development and shoot a lot gun.  My Taurus is often regulated to part time carry now or most often a extra gat to be locked in the truck for emergencies.  All in all I still like this well used little bugger and will probably be packing it in the woods again this fall-winter.